EC Offroad
DCS 12V 260AH DUAL BATTERY SYSTEM (LITHIUM)
DCS 12V 260AH DUAL BATTERY SYSTEM (LITHIUM)
Couldn't load pickup availability
– 2 x DCS 130Ah LFP batteries
– Victron Smart Battery Protect SBP-65A
– Max alternator output 250Amps
– Backed by a 3 year under bonnet replacement warranty.
– Fully programmable via bluetooth
– Tiny power consumption 1.2mA when engaged
– Suitable for Land Cruiser 200
– Integrated 80V/20A MPPT solar regulator
PRE ORDER NOW

DCS Engineering high efficiency 80V/20A MPPT solar regulator especially developed for in battery applications
Our latest upgraded hybrid under bonnet dual battery systems have just been finalised, 30% more storage and now with an integrated 20A MPPT solar regulator.
– 2 x DCS 130Ah LFP batteries (optimized for Engine Bay installs)
– Victron Smart Battery Protect SBP-65A
– Max alternator output 250Amps
– Backed by a 3 year under bonnet replacement warranty
– Fully programmable engine cranking reserve % via Bluetooth
– Tiny power consumption 1.2mA when engaged
– Suitable for Land Cruiser 80, 100, 200 & 300 series and any other vehicles that can accommodate the battery size
– Massive 210Ah usable for accessories with 50Ah reserved for engine starting
– DCS 80V/20A integrated MPPT solar regulator included inside one of the batteries for direct solar input from any solar panel up to 80Voc
With 260Ah of total lithium storage means you have 260Ah x 20% = 50Ah always there for engine cranking. Allowing the upper 80% for deep cycling 210Ah. Why do we use the latest fully programmable Victron Smart Battery Protects? Because they only have a 1.2mA engaged current draw and the isolators will spend 99% of their service life engaged. They have Bluetooth so via the Victron Connect App you can make quick and easy adjustments, override the isolators and check battery voltages. It also means you don’t need to go pulling the car apart to get to it to check it. These isolators should be installed as close to the batteries as possible but inside the cabin they are not suitable for engine bay installations.
Specifications: | – |
---|---|
Nominal Voltage | 12.8V |
Nominal Capacity (1Hr) | 130Ah |
Dimensions | Length: 328mm, Width: 171mm, Height: 215mm |
Weight | 15.0 Kg |
Cycling voltage | 12.8~ 14.6V |
Charge voltage | 13.8 ~ 14.6V |
Float Voltage | 13.5 ~ 13.7V |
Maximum Charge Current | 125A |
Recommended Charge Current | ≤100A |
Maximum Discharge Current | ≤200A |
BMS (built in) | Automatic cell balancing, over discharge/charge |
Cell Chemistry | DCS 3.2V 7.2Ah Cylindrical (LifePO4) |
Cycle Performance | 2500 Cycles @ 100% DOD |
LCA | 1000 |
Engine cranking | Max 3000W starter motors |
Ingress Protection | IP54 |
Case | PP (flame retradent) |
Operating temp Range | -30 to +80 degrees C |
Terminals | Top Mount M8 Stainless steel / Copper |
Parallel Connections Only | Yes |
Warranty | 3 under bonnet |




